 |
Downpipe (DPF Delete) 579$
- Replaces your restrictive and unreliable Diesel Particulate Filter
- Increases performance and fuel economy
- Deletes the rear EGR (block off plate included)
- Built from 304 Stainless Steel schedule 10 piping (1/8" thick)
- Reuses all the stock sensors (3 EGT and 1 wide-band O2 sensor)
- Reuses the stock V band clamp and gasket to mount to turbo
- Highest quality flex pipe available with interlocking liner
- Features a centering sleeve in the down-pipe inlet so that the
downpipe and gasket are perfectly centered on the turbo outlet
- Features a 1/4" thick bracket that supports and locates the
downpipe into position for a perfect fit and foolproof installation
- Inside Diameter: 2.75"
- Outlet uses a 3" 3 bolt flange
- Comes with all hardware necessary for installation
|
 |
Exhaust Mid Pipe (Cat Pipe) 259$ - 589$
- Connects the RAWTEK Performance Down-pipe to your stock cat back exhaust
- Replaces both stock catalytic converters and exhaust valve
- Built from 304 stainless steel 16ga tubing
- Outside diameter: 3"
- Bung installed for secondary O2 sensor
- Mounts to all original exhaust hangers
Available with the following options:
- Straight Pipe, no cats, no resonator 259$
- High flow cat, no resonator 419$
- Resonator, no cats 429$
- High flow cat and resonator 589$
- Comes with all hardware necessary for installation
|
 |
Cat Back Exhaust MK6 Jetta 369$
- Replaces your stock cat back exhaust
- Eliminates the rear muffler
- Works only with the Rawtek Downpipe and Midpipe
- Built from 304 Stainless Steel 16ga tubing
- Mandrel Bent for maximum exhaust flow
- Outside diameter: 3"
- Reuses the stock exhaust hangers
- Uses stainless steel band clamps on slip joints
- Installs in minutes
- Comes with all hardware necessary for installation
|
 |
Cold Air Intake MK6 Jetta 259$
- Replaces your restrictive stock air box
- Lets your turbo be heard
- Sounds just like a blow off valve when the turbo decompresses
- Built from 304 stainless steel 16ga tubing
- Outside dimeter: 3"
- Comes with all hardware necessary for installation
|
 |
Tuning
- Increase Performance and Fuel Economy with software by Malone Tuning
We tune the following engines:
- 1.9L VE TDI
- 1.9L PD TDI
- 2.0L CR TDI
- 3.0L V6 TDI
- 5.0L V10 TDI
|
 |
Complete Kit for MK6 Jetta 1,939$ - 2,269$
- Increases performance and fuel economy
- Get the most out of your stock turbo and injectors
- Replaces your entire exhaust system from the Turbo back
Kit consists of the following components:
- Rawtek Downpipe (reg. 579$)
- Rawtek Exhaust Midpipe (reg. 259$ - 589$)
- Rawtek Cat Back Exhaust MK6 Jetta (reg. 369$)
- Rawtek Cold Air Intake MK6 Jetta (reg. 259$)
- Malone Stage 2 with DPF and EGR Delete (reg. 549$)
- You save 76$ when buying the complete kit
- ECM must be mailed in to get tuned at Rawtek
- Comes with all hardware necessary for installation
|
